Industrial door and gate drives:

Rolling gate drive WH – WHNM

Rolltorantrieb WH – WHNM

Worm gear drive for sprocket support for 3-phase networks (230/400 V, 50 Hz). Drive unit with mounted reversing contactor and limit switch.
Power: 0.18 – 11 kW
Drive torque: 54 – 2504 Nm

Double wing gate drive Optimus 400 / 800

Flügeltorantrieb Optimus 400 / 800

For heavy swing gates with a wing length of 5 - 8 m

Fire protection/rolling gate drive WHF

Brandschutz- /Rolltortorantrieb WHF

Spur gear drive for sprocket support for 3-phase (230/400 V, 50 Hz) Drive unit with mounted reversing contactor and limit switch.
Integrated mechanical centrifugal brake and safety brake.
Power: 0.25 – 4 kW
Torque output: 200 – 4600 Nm

Sliding door drive WH-R35 - WHRV-R300 / NGS-RS

Schiebetorantrieb WH-R35 – WHRV-R300 / NGS-RS

Standard output side: right. Drive unit with mounted reversing contactor for 3-phase (230/400 V, 50 Hz).
Power: 0.25 – 2.2 kW
Torque output: 73 – 500 Nm

High speed door drive / double wing gate drive NSA-RS 500 / 3.5 – 700 / 1.7

Schnelllauftorantrieb / Flügeltorantrieb

Installation unit with mounted limit switch, low output for mounting of the connecting rods and manual release. For 3-phase networks (230/400 V, 50 Hz)
Maximum wing width: 1-2 m
Power: 0.35 – 0.55 kW
Torque output: 500 - 700 Nm

Sectional gate drive GST 120

Sektionaltorantieb GST 120

Attachment drive with mounted reversing contactor. Hollow shaft d = 25.4 / 25 and 30 mm for 3-phase (230/400 V, 50 Hz). Output speed: 32 / 25 rpm
Power: 0.37 – 0.75 kW
Torque output: 120 Nm

Safe and compact module - Elektromat SIK 15-23

Aufsteck-Elektromat

For rolling gate / rolling grit drives for limited mounting space with integrated limit switch and roll-off safety.

Optionally with mounted reversing contactor system

Power: 0.30 – 0.40 kW
Torque output: 150 - 230 Nm

Safe and compact module - Elektromat SE 5.24 – 14.21

Aufsteck-Elektromat SE 5.24 – 14.21

For sectional gates without weight balance and rolling gate / rolling grit drive with integrated limit switch.
Optional with mounted reversing contactor system and integrated roll-off safety.
Also available with DES. Programming on the floor.
Power: 0.37 – 0.45 kW
Torque output: 50 – 140 Nm

Roll-off safety FV 20/35 - 360

Abrollsicherung FV 20/35 - 360

Arresting device for rolling gates with damping.
Arresting torque: 200 – 3600 Nm
Operating speed: 9 – 22 rpm